| |
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Select a service and click Properties. The service configuration form opens.
|
3 |
On the navigation tree, expand Sites→Routing Instance→Spoke SDP Bindings→SDP.
|
4 |
Select one or more Spoke SDP Bindings, right-click, and choose Properties. The Spoke SDP Binding configuration form opens.
|
5 |
Click on the OAM tab.
|
6 |
On the ETH-CFM tab, MEPs panel, click Create or select an existing MEP entry and click Properties. The MEP (Create|Edit) form opens.
|
7 |
Select a maintenance entity group.
|
8 |
Configure the required parameters.
The CCM Padding Packet Size parameter cannot be configured when the CCM interval parameter is set to 10 ms or 100 ms.
|
9 |
If the MD for the MEP has a Name Type of none and the associated MEG has a Name Format of icc-based, the Y.1731 Tests and AIS tabs are configurable. Click on the Y.1731 Tests tab and configure the required parameters.
The Eth Test Pattern parameter is configurable when the Eth Test Enabled parameter is enabled.
|
10 |
Click on the AIS tab and configure the required parameters.
The AIS Meg Level parameter is configurable when the AIS Enabled parameter is enabled.
|
11 |
Save your changes and close the forms.
End of steps |