Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

Select a service and click Properties. The service configuration form opens.

On the navigation tree, expand the Sites icon.

Perform one of the following steps.

1. To create a MEP on an Access Interface SAP, expand site_n→Access Interfaces. The site SAPs are displayed.

   MEPs can be configured on an Access Interface SAP for VPLS, VPRN, IES, and VLL Epipe services.

2. To create a Down MEP on a Subscriber Group Interface SAP, expand site_n→Group Interfaces. The site group interface SAPs are displayed.

   Down MEPs can be configured on a Subscriber Group Interface SAP for VPRN and IES.

Select one or more SAPs and click Properties. The SAP configuration form opens.

Click on the MEP tab.

1. Click Create or select an existing MEP entry and click Properties. The MEP (Create|Edit) form opens.

2. Configure the required parameters.

   The Control MEP parameter is only displayed if the Interface Type parameter is set to Ethernet Tunnel Path Endpoint.

   The CCM Padding Packet Size (Bytes) parameter cannot be configured when the CCM interval parameter is set to 10 ms or 100 ms.

   When configuring a Down MEP on a Subscriber Group Interface SAP, the Direction parameter cannot be configured.

3. If the MD for the MEP has a Name Type of none and the associated MEG has a Name Format of icc-based, the Y.1731 Tests and AIS tabs are configurable. Configure the required parameters on the tabs.

   The Eth Test Pattern parameter is configurable when the Eth Test Enabled parameter is enabled.

   The AIS Meg Level parameter is configurable when the AIS Enabled parameter is enabled.

Save your changes and close the forms.

End of steps