To modify and re-evaluate an MSAP policy on an MSAP
Purpose
Perform this procedure to re-apply an MSAP policy on an existing MSAP. MSAPs cannot be edited; however, MSAP policies on existing MSAPs can be changed and re-applied.
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form appears. |
2 |
Configure the filter criteria; see To list MSAPs and view MSAP properties for information about configuring the filter to list MSAPs. A list of MSAPs for the service appears. |
3 |
Select an MSAP and click Properties. The service configuration form opens. |
4 |
Click on the MSAP Properties tab. |
5 |
Click Properties in the Creation MSAP Policy panel and enter the required changes. |
6 |
Click Apply and confirm the changes. |
7 |
Click on the MSAP Properties tab. |
8 |
Specify the Do Action option for the Creation MSAP Policy Re-evaluation parameter to apply the new policy parameter values. If you specify Not Applicable, the new policy parameter values are not applied, but remain on the policy until you specify the Do Action option. |
9 |
Save your changes and close the form. End of steps |