|
|
1 |
Choose Create→Service→VLAN from the NFM-P main menu. The VLAN Service (Create) form opens.
|
2 |
Choose a customer to associate with the VLAN.
|
3 |
Configure the required parameters.
The Service ID parameter is configurable when the Auto-Assign ID parameter is disabled.
The SVC Mgr Service ID parameter is configurable when the Auto-Assign ID parameter is disabled.
|
4 |
Click on the VLAN tab and set the Application parameter to Backbone VLAN.
|
5 |
Select a group to associate with the VLAN in the Group panel.
Note: All network elements within a backbone infrastructure must belong to the same VLAN group.
|
6 |
On the service tree, right-click on VLAN Service and choose Create VLAN Site. The Select Network Elements - VLAN Service form opens.
|
7 |
Choose one or more sites and click OK. The form closes.
|
8 |
Save your changes and close the form.
End of steps |