To create an OmniSwitch VIP VLAN service
Steps
1 |
Choose Create→Service→VLAN from the NFM-P main menu. The VLAN (Create) Service form opens. |
2 |
Select a customer to associate with the VLAN. |
3 |
Configure the required general parameters: The Service ID parameter is configurable when the Auto-Assign ID parameter is disabled. The SVC Mgr Service ID parameter is configurable when the Auto-Assign ID parameter is disabled. |
4 |
Click on the VLAN tab and set the Application parameter to VIP VLAN. |
5 |
Select a group to associate with the VLAN in the Group panel. |
6 |
On the navigation tree, right-click on VLAN and choose Create VLAN Site to select a site for the VLAN. The Site (Create) form opens. |
7 |
Configure the required general parameters. |
8 |
Click on the CFM tab and configure the required parameters. |
9 |
Save the changes and close the forms. |
10 |
Perform To associate an access interface with a VLAN service to create one or more access interfaces on the site. End of steps |