To add Ethernet services to a VLAN Site

Purpose

During Ethernet service creation, you can create one or more service access multipoints. A service access multipoint is assigned a user-selected or auto-generated ID when the multipoint is created.

VLAN service access points, a SAP policy, and customer VLANs are associated with service access multipoints. Customer VLANs associate customer traffic with a VLAN-stacking SAP and identify the type of customer traffic that is received on the SAP UNI ports.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Select a VLAN service.

3 

On the service navigation tree, expand the site on which you want to add the Ethernet service, right-click on Ethernet Services and choose Create Ethernet Service. The Ethernet Service (Create) form opens.

4 

Configure the Ethernet Service Name parameter.

5 

On the service navigation tree, right-click on Ethernet Service and choose Create Service Access Multipoint. The Service Access MultiPoint (Create) form opens

6 

Configure the required general parameters.

7 

If you need to apply a SAP policy other than the default one, click on the Clear button to clear the default SAP policy from the SAP Profile panel. Otherwise, go to Step 9 .

8 

Select a SAP profile to associate with the service access multipoint.

9 

On the service navigation tree, right-click on Service Access Points and choose Create VLAN Service Access Point. The VLAN Service Access Point (Create) form opens.

10 

Configure the required general parameters.

11 

Click on the Port tab.

12 

Select a port for the VLAN SAP.

Note: The form lists only ports in access or hybrid mode. To choose a port that is not listed, you must set the Mode parameter for the port to Access or Hybrid. After you do this, the port is listed when you click on the Search button.

13 

Save the changes and close the form.

14 

To add one or more customer VLANs to the service access multipoint:

  1. On the Service Access MultiPoint (Create) form, click on the Customer VLANs tab.

  2. Click Create. The Customer VLAN (Create) form opens.

  3. Configure the required parameters.

15 

Save the changes and close the forms.

End of steps