To configure an MPLS-TP static pseudowire on a VPLS spoke SDP binding
Purpose
Create an MPLS-TP static pseudowire on the spoke SDP binding. An MPLS-TP service tunnel must be used in the SDP binding, and the Control Word parameter for pseudowire OAM must be set to Preferred. See To create a VPLS or MVPLS spoke SDP binding .
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose a VPLS and click Properties. The VPLS Service (Edit) form opens. |
3 |
On the service tree, expand Sites→site→Spoke SDP Bindings. |
4 |
Click on the SDP binding on which you want to configure the MPLS-TP static pseudowire. The Spoke SDP Binding (Edit) form opens. |
5 |
Click on the Control Channel tab and configure the required parameters. |
6 |
Click on the Static PW tab and click Create. The PW Path ID (Create) form opens. |
7 |
Configure the Path AGI parameter. |
8 |
Configure the parameters in the Source Attachment Individual Identifier panel. |
9 |
Configure the parameters in the Target Attachment Individual Identifier panel. |
10 |
Save the changes and close the forms. End of steps |