|
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Configure the filter criteria and click Search. A list of services appears.
|
3 |
Choose a VPLS and click Properties. The VPLS Service (Edit) form opens.
|
4 |
On the service tree, expand Sites→site→Mesh|Spoke SDP Bindings.
|
5 |
Right-click on the mesh or spoke SDP binding you need to configure and choose Properties. The [Mesh|Spoke] SDP Binding (Edit) form opens.
|
6 |
Click on the IGMP Snooping tab.
|
7 |
Configure the required parameters.
The General Query Interval (seconds), Maximum Response Interval (seconds), Robust count, and IGMP Version parameters are configurable when the Send Queries parameter is enabled.
|
8 |
To configure a multicast CAC policy, select a policy in the Multicast CAC Policy panel.
|
9 |
Configure the required parameters.
|
10 |
Click on the Static Mcast Group tab to configure a static multicast group.
|
11 |
Click Create. The Access Interface Igmp Snooping Mcast Group Display (Create) form opens.
|
12 |
Configure the required parameters.
|
13 |
Save the changes and close the forms.
End of steps |