|
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose a VPLS and click Properties. The VPLS Service (Edit) form opens.
|
3 |
On the service tree, expand Sites→site→Mesh|Spoke SDP Bindings.
|
4 |
Right-click on the SDP binding you want to configure and choose Properties. The [Mesh|Spoke] SDP Binding (Edit) form opens.
|
5 |
Click on the MLD Snooping tab.
Note: The MLD Snooping tab does not appear if you are creating a Mesh SDP binding for a B-site or I-site.
|
6 |
Configure the required parameters.
The General Query Interval (seconds), Maximum Response Interval (seconds), Robust count, and MLD version parameters are configurable when the Send Queries parameter is enabled.
|
7 |
To configure one or more static multicast groups:
-
Click on the Static Mcast Group tab.
-
Click Create. The Circuit Mld Snooping Mcast Group Display (Create) form opens.
-
Configure the required parameters.
|
8 |
Save the changes and close the forms.
End of steps |