To configure an Ethernet segment
Purpose
Ethernet segments are used by EVPNs. An Ethernet segment is a group of ports on an NE that are part of the same redundancy group, and are identified by a unique Ethernet Segment Identifier.
Steps
1 |
Navigate to the NE where you want to configure an Ethernet segment. |
2 |
Right-click on the NE and choose Properties. The Network Element form opens. |
3 |
Click on the Globals tab, and then on the BGP tab. In the Ethernet Segment panel, click Create. The BGP EVPN Ethernet Segment form opens. |
4 |
Configure the required parameters. |
5 |
Save your changes and close the form. End of steps |