To create a static ISID range on a VPLS B-L2 access interface or spoke SDP binding

Purpose

Perform the following procedure to create a static ISID range to allow I-VPLS services to connect to non-SPB I-VPLS services. You can create one or more static ISID ranges on a B-L2 access interface or spoke SDP binding on a control or user B-VPLS site. See To enable SPB on a control B-VPLS site and To enable SPB on a user B-VPLS site for information about how to enable SPB on a control or user site.

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose a VPLS and click Properties. The VPLS Service (Edit) form opens.


On the service tree, expand the B-VPLS site.


Perform one of the following:

  1. To add a static ISID range on a B-L2 access interface, expand the L2 Access Interfaces icon, and click on the B-L2 access interface. The Port (Edit) form opens.

  2. To add a static ISID range on an SDP binding, expand the Spoke SDP Bindings icon and click on the SDP binding. The Spoke SDP Binding (Edit) form opens.


Click on the Static ISID tab.


Click Create. The Static ISID Range Entry (Create) form opens.


Configure the required parameters.


Save the changes and close the form.


To view the status information about the configured static ISIDs, click on the Static ISID Ranges tab.


10 

Save the changes and close the forms.

End of steps