To configure PTP on a VPRN site
Note: PTP must be enabled on the base router before it can be configured on a VPRN site. See
To configure the IEEE 1588 PTP clock on a 7210 SAS, 7250 IXR, 7450 ESS, or 7750 SR for information about configuring PTP on the 7705 SAR and 7750 SR.
Steps
|
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.
|
3 |
On the service navigation tree, expand Sites, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens.
|
4 |
Set the PTP State parameter to Enabled.
|
5 |
Click on the PTP tab and configure the required general parameters.
|
6 |
To create PTP peers:
-
Click on the Peers tab.
-
Click Create. The IEEE 1588 PTP Peer (Create) form opens.
-
Configure the required parameters.
-
Save the changes and close the form.
|
7 |
Save the changes and close the forms.
End of steps |