Sample VPRN service configuration

Sample VPRN service

The following figure shows a sample VPRN service configuration.

Figure 79-4: Sample VPRN Configuration
Sample VPRN Configuration
Configuration steps

Assuming the core IP/MPLS or GRE network is already configured, the following high-level tasks are required to configure the sample VPRN service.

 

Configure policies as required, for example, access ingress and egress, Routing, Scheduler, ACL IP, Accounting, and ANCP.


Configure ports as access ports for use in the service.


Configure service tunnels as required.


Configure MP-BGP for PE-to-PE routing.


Create and configure customers.


Create and configure VPRN 1.