To configure an override source IP address on a VPRN site
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens. |
3 |
On the service navigation tree, expand the Sites icon, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens. |
4 |
Click on the Source Addresses tab and click Create. The Source Address (Create) form opens. |
5 |
Configure the Source IP Application parameter. |
6 |
Set the Source Address Termination parameter to IP Address. |
7 |
Configure the Source IP Address parameter. Enter a valid IP address that the VPRN virtual routing instance will identify. Note: An IPv6 address option for the Source IP Address parameter is available when the IPv6 Allowed parameter is set during network interface creation. You must select an IPv6 Source IP Address before you can select IPv6 Source IP Applications. |
8 |
Save the changes and close the forms. End of steps |