To enable routing protocols on a VPRN site

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.


On the service navigation tree, expand Sites, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens.


Click on the Routing tab, then the Protocols tab.


Enable the required protocol parameters.

When you choose a protocol, the site and the protocols that are enabled on the site appear in the list panel.

Note: If both the OSPFv2 Enabled parameter and the OSPFv3 Enabled parameter are disabled, navigate to the Components view of the VPRN, right-click on Protocols, then select Create OSPF Site. The OSPF Site (Create) form opens. In the OSPF Instance panel, configure the Version parameter.


To configure multicast for the site, click on the Multicast tab and enable the required protocol parameters.

When you choose a protocol, the site and the protocols that are enabled on the site appear in the list panel.


Save and close the forms.

End of steps