To force a WLAN GW switchover to standby management on a VPRN subscriber interface
Purpose
Perform this procedure to force a WLAN gateway service to switch to a standby system for the UE associated with a subscriber interface.
Note: The Force Switchover command is only available on an active subscriber interface.
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose a VPRN and click Properties. The VPRN Service form opens. |
3 |
On the service navigation tree, expand Sites→Routing Instance→Subscriber Interfaces, right-click on the subscriber interface object on which you want to perform a WLAN GW switchover and choose Properties. The VPRN Subscriber Interface (Edit) form opens. |
4 |
Click on the WLAN GW Redundancy tab. |
5 |
Click Force Switchover. |
6 |
Close the forms. End of steps |