To add an IGMP group interface to a VPRN

Prerequisites

Before an IGMP group interface can be configured, the following prerequisites must be met:

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose a VPRN and click Properties. The VPRN Service (Edit) form opens.


On the service navigation tree, expand Sites→Routing Instance→Routing Instance→Routing Instance→Protocols→IGMP instance.


Configure the required parameters.


Right-click on the IGMP instance and choose Create IGMP Group Interface. The IGMP Group Interface, Routing Instance (Create) form opens.


To assign a VPRN group interface to the IGMP group interface:

  1. Click Select in the Interface panel and choose a VPRN group interface.

  2. Configure the required parameters.


Click on the Behavior tab and configure the required parameters.


To configure multicast CAC, click on the Multicast CAC tab, select a multicast CAC policy and configure the required parameters.


Save the changes and close the forms.

End of steps