| |
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.
|
3 |
On the service navigation tree, expand the Sites icon, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens.
|
4 |
Configure the VRF import and export policies.
-
Click on the VRF Import Policies tab or on the VRF Export Policies tab.
-
Select the required VRF import or export policies 1 through 15.
Note:
Any RT values that are reserved in the RT reservation table for this service are automatically populated in the VRF import or export policy. See
To reserve route targets for specific VPRN services for more information about how to reserve an RT for a specific VPRN service.
If you enabled the Enable RT/RD Auto Assignment parameter when you created the VPRN service, the NFM-P automatically creates and assigns a VRF import or export policy to the VPRN site. Note 2 does not apply if the condition in Note 1 is met. See
To configure a policy to reserve an RT and RD range for VPRN services for information about how to create a VPRN RT/RD Auto Assignment range policy.
|
5 |
Save the changes and close the forms.
End of steps |