To configure a network ingress filter policy on a VPRN site

Purpose

Perform this procedure to assign an ingress IP and/or IPv6 template filter policy that will be applied to unicast traffic arriving on all network interfaces for the VPRN service site. The filter policy is applicable to both automatically created and explicitly defined spokes, and is supported for inter-AS and intra-AS network ports and for any label type. Network chassis mode D is required.

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.


On the service navigation tree, expand Sites, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens.


In the Network Ingress Filters panel:

  1. Select the required ACL IP Filter policy.

  2. Select the required ACL IPv6 Filter policy.

    You can specify both an IP and an IPv6 policy here, if required.


Save the changes and close the forms.

End of steps