To configure WLAN GW functionality on a VPRN site

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.


On the service navigation tree, expand the Sites icon, right-click on a routing instance and choose Properties. The VPRN Site (Edit) form opens.


Enable the Enable WLAN GW parameter.


Click on the WLAN GW tab and configure the APN Network Identifier parameter.


Configure the parameters in the Mobile Triggered Accounting panel.


Click on the Mobile GW Address Map tab to configure a mobile GW address map.

  1. Click Create. The Mobile Gateway Address Map (Create) form opens.

  2. Configure the Mobile Gateway Address Prefix and Prefix Length parameters.

  3. Select a mobile gateway/peer profile policy.

  4. Save your changes and close the form.


Click on the Distributed Subscriber Management tab and configure the TCP Maximum Segment Size Adjustment parameter.


Click on the Distributed Subscriber Management tab and configure the TCP Maximum Segment Size Adjustment parameter.


10 

If the WLAN GW is intended for a home LAN extension configuration, click on the Cross Connect tab.

Configure the required parameters and select a WLAN GW group.


11 

Save the changes and close the forms.

End of steps