To view DHCPv6 leases

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.


On the service navigation tree, click on the site where you need to view DHCPv6 leases; expand the entries for that site.


Choose routing instance from the navigation tree. The Site (Edit) form opens.


Click on the RADIUS/DHCP/Diameter tab. The Local DHCP Servers tab is displayed.


Click on the DHCP V6 tab. The list of associated DHCPv6 servers is displayed.


Choose a DHCPv6 server and click Properties. The Local DHCPv6 Server (Edit) form opens.


Click Show Leases. If the Show Leases button is not visible, click on the More Actions button and choose Show Leases. The DHCPv6 Server Show Leases form opens.


Perform one of the following:

  1. To view the entire list of leases that are active on the DHCPv6 server, click OK.

  2. To view the lease information for a specific prefix, enter the IP address in the Prefix parameter for the particular DHCPv6 server and click OK.

    Note: If the prefix does not exist in the list of leases, a message displays.

  3. To view the detailed lease information for a specific prefix, enter the IP address in the Prefix parameter for the particular DHCPv6 server, select the Detail check box, and click OK. The form displays the CLI details for the specific prefix.


10 

Close the forms.

End of steps