To configure residential subscriber management for a VPRN L3 access interface
Prerequisites
Residential subscriber management is supported on the 7450 ESS in mixed mode and 7750 SR.
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens. |
3 |
On the service navigation tree, expand Site→L3 Access Interfaces, right-click on an L3 access interface choose Properties. The VPRN L3 Access Interface (Edit) form opens. |
4 |
Click on the Subscriber Management tab. |
5 |
Enable the SHCV Enabled parameter. |
6 |
Configure the required parameters on the Subscriber Host Connectivity Verification panel. |
7 |
Select an SHCV IPv4 policy. |
8 |
Save the changes and close the forms. End of steps |