To bind an application profile to a VPRN L3 access interface

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

3 

On the service navigation tree, expand Sites→Routing Instance→L3 Access Interfaces, right-click on an L3 access interface and choose Properties. The VPRN L3 Access Interface (Edit) form opens.

4 

Click on the Application Assurance tab.

5 

Select an application profile string.

Only local profiles that already exist on the NE can be selected.

6 

To choose one of the following AA transit policy types:

Note: You can only associate one AA transit policy type with a service object.

To bind a transit policy to an L3 access interface, a port must already exist on the interface.

You can bind a transit policy to only one L3 access interface or spoke SDP binding per NE.

The transit policy and the application profile must belong to the same application assurance group or partition.

  1. Select an AA transit IP policy in the Transit IP Policy panel.

  2. Select an AA transit prefix policy in the Transit Prefix Policy panel.

7 

Select an AA redundant protocol in the AA Redundant Protocol panel.

8 

Save the changes and close the forms.

End of steps