|
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.
|
3 |
On the service navigation tree, expand Site→L3 Access Interfaces, right-click on an L3 access interface choose Properties. The VPRN L3 Access Interface (Edit) form opens.
|
4 |
Click on the Advertisement tab.
|
5 |
Click Create to add a router advertisement entry. The Router Advertisement (Create) form opens.
|
6 |
Configure the required parameters.
If you are configuring the L3 interface for an IPv6 VRRP instance, then the Send Advertisement and Use Virtual MAC Address parameters must both be enabled.
|
7 |
To configure RDNSS advertisement options:
-
Click on the DNS Options tab and click Create. The DNS Options form opens.
-
Configure the required parameters.
-
Save the changes and close the form.
|
8 |
To configure router advertisement prefixes:
-
Click on the Prefix tab and click Create. The Router Advertisement Prefix form opens.
-
Configure the required parameters.
-
Save the changes and close the form.
|
9 |
Save the changes and close the forms.
End of steps |