To configure DHCPv6 on a VPRN L3 access interface
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens. |
3 |
On the service navigation tree, expand Site→L3 Access Interfaces, right-click on an L3 access interface and choose Properties. The VPRN L3 Access Interface (Edit) form opens. |
4 |
Set the IPv6 Allowed parameter to enabled. |
5 |
Click on the DHCPv6 tab and configure the required parameters on the DHCPv6 Relay — General tab. |
6 |
Click on the Server tab and configure Server 1 through Server 8 parameters. |
7 |
To configure the interface name for each DHCPv6 server that you configured, select a configured interface in the Zone Index panel. |
8 |
Click on the DHCPv6-Prefix tab and click Create. The DhcpRelayV6PrefixDelegation (Create) form opens. |
9 |
Configure the required parameters. |
10 |
Save the changes and close the forms. End of steps |