To view VLL service contents

Purpose

Use this procedure to view various contents of a VLL L2 service and any modifications you make to it before deploying the changes.

Note: The procedure also provides information on the following policy types associated with the service:

  • QoS SAP ingress and QoS SAP egress polices

  • ACL IP/IPv6 filters and ACL MAC filter policies

Note: The displayed contents of a service is applicable to only one service site.

Two information views are available. The Committed info view displays the current contents of a service, and the Committed menu item is always enabled. The Modified info view allows you to review any changes you make to a service before committing them. Modified, created, and deleted attributes and objects are displayed.

Steps
 
1 

Choose Manage Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Click Search and select the service that you want to view or modify.

3 

On the service navigation tree, expand the Sites icon and click on the required site. The site properties form is displayed.

4 

Perform one of the following:

  1. To view the currently committed service contents, go to Step 5 .

  2. To view modified service contents before committing any changes, go to Step 6 .

5 

Click on the Show Info and choose the Committed menu item. A Committed Values form is displayed and shows various policy attributes that have been previously configured and saved in the local policy. The CLI information of the QoS policies and ACL filters associated with the service is also displayed. The information displayed in the form is similar to the information retrieved in CLI by running the “config>service>Service Type# info” command, where Service Type# is the type of service (followed by its Service ID, for example: vll37) that you want to query.

6 

Modify any service parameters or objects, as required. Otherwise go to Step 9 .

7 

Click on the Show Info and choose the Modified menu item. A Modified Values form is displayed. The table lists modified, created, and deleted actions, as well as specific attributes and objects, along with their old value, new value, and tab location. The Attribute Title corresponds to the attribute or object name acted upon by your current modifications. For created objects, the values of mandatory attributes are shown in comma-separated format.

8 

Select an item in the Modified Values form and then click Show on Form. The service form tab containing the changed item is displayed and the modified attribute is highlighted in blue.

9 

Save your changes if required, and close the form.

End of steps