To configure alternate profiles under IEEE PTP Clock on a 7250 IXR, 7450 ESS, 7750 SR, or 7950 XRS
Before you begin
This procedure is not supported on 7250 IXR-s, 7250 IXR-e, 7250 IXR-e2, 7250 IXR-e2c, and 7250 IXR-ec.
An alternate profile can only be configured if the primary profile is either G.8275.1 or G.8275.2, and the clock type is either Master or Boundary. The initially-defined profile functions as a primary profile and up to six alternate profiles can be configured and assigned to desired PTP ports. If the PTP port is created without choosing any alternate profiles, then it will use the primary profile.
Steps
1 |
In the navigation tree equipment view, right-click on the required device and choose Properties. The Network Element (Edit) form opens. |
2 |
Click on the IEEE PTP Clock tab. |
3 |
Select an IEEE 1588 PTP Clock from the list and click Properties. The IEEE 1588 PTP Clock (Edit) form opens. |
4 |
Click Create in the PTP Clock Alternate Profiles panel. The PTP Clock Alternate Profile Inter Working (Create) form opens. |
5 |
Configure the required parameters. |
6 |
Save and close the forms. End of steps |