To modify the SFP profile and SFP profile rate on the 1830 VWM

Purpose

Perform this procedure to modify SFP profile or SFP profile rate associated with the CDR channel on the 1830 VWM TLU–9, 9M, and ITP devices.

Steps
 

Perform one of the following:

  1. From the device:

    1. On the equipment tree, right-click on the 1830 VWM device object and choose Properties. The Network Element (Edit) form opens.

    2. Click on the SFP Profiles tab. A list of 32 default SFP profiles are displayed.

    3. Double-click on the SFP profile. The VWM SFP Profiles window opens with the General tab displayed.

      If required, edit the SFP Profile Name.

  2. From the shelf:

    1. On the equipment tree, expand Network→1830 VWM.

    2. Right-click on the shelf object and choose Properties. The Shelf (Edit) form opens.

    3. Click on the Shelf Specifics tab.

    4. Go to Shelf SFP Profile section.

      If required, edit the SFP Profile Name. By default, Profile1 is assigned.

    5. Click Select. A list of 32 default SFP profiles are displayed.


Click on the SFP Profiles Rates tab to display the list of supported SFP rates.


Double-click on the selected SFP profile rate. The VWM SFP Profile Rate window opens.


Configure the SFP Profile Rate parameter from the drop-down menu..


Save your changes and close the form.

End of steps