To configure Ethernet interfaces, DHCP servers, and DHCP relays on 1830 TPS routing instances

Steps
 

In the navigation tree routing view, expand Network→1830 TPS→Routing Instance.


Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.


Click on the TPS Routing Instance tab, and the Ethernet Interfaces sub-tab.


Create a new Ethernet interface, or choose an Ethernet interface to configure.

  1. Create a new Ethernet interface by performing the following:

    1. Click on the Create button. The Ethernet Interface (New Instance) form opens.

    2. Click Select and choose a card slot for the Ethernet interface.

    3. Configure the parameters as required, and click Apply.

  2. Select an Ethernet interface and click on Properties. The Ethernet Interface form opens.


Configure the parameters in the Control Network and OSPF panels, as required.


Click OK to save your changes and close the Ethernet Instance form.


Click on the DHCP Server tab. Click Create to create a new DHCP Server, or select an existing server and click Properties. The DHCP Server form appears.


Configure the parameters as required, then click OK to save and close the form.


Click on the DHCP Relay tab. Click Create to create a new DHCP Relay entry, or select an existing entry and click Properties. The DHCP Relay form opens.


10 

Configure the port types, and select the ports to be used by the relay.


11 

Configure the DHCP Server IP parameter, then click OK to save and close the form.


12 

Click OK on the Routing Instance form to save your changes and close the form.

End of steps