To configure satellite shelf uplink port topology

Overview

Use this procedure to configure uplink port topology between the connection ports on an NE and the uplink ports on a satellite shelf.

Steps
 

Perform one of the following:

  1. To configure uplink port topology from the NFM-P main menu:

    1. From the NFM-P main menu, select Create→Equipment→Satellite Port Link.

  2. To configure uplink port topology from the NE level:

    1. On the equipment tree, right-click on the NE and choose Properties.

    2. Click on the Physical Links tab, and then on the Satellite Port Topology tab. Click Create.

  3. To configure uplink port topology from the port level:

    1. On the equipment tree, click on an uplink port on the satellite shelf.

    2. Hold the Ctrl key and click on the port on the NE to which the satellite shelf is connected.

    3. Right-click on one of the ports and select Create Satellite Port Link.

    4. Go to Step 4.


In the End Pointer A Port panel, click on the Select button and choose an uplink port on the satellite shelf.


In the End Pointer B Port panel, click on the Select button and choose the port on the NE to which the satellite shelf is connected.


Save your changes and close the forms.

End of steps