|
|
1 |
Choose Policies→Filter→ACL IP Exception Filter from the NFM-P main menu. The ACL IP Exception Filter Policies form opens.
|
2 |
Click Create or select an existing policy and click Properties. The ACL IP Exception Filter (Create|Edit) form opens.
|
3 |
Configure the parameters on the General tab as required.
|
4 |
Configure one or more filter entries:
-
Click on the Filter Entries tab and click Create. The Entry, ACL IP Exception Filter, Global Policy (Create) form opens.
-
Configure the required parameters on the General tab.
-
Click on the Filter Properties tab.
-
Configure the Protocol parameter.
The form refreshes to display the parameters applicable to the option you choose. For example, if you choose ICMP, the ICMP Properties panel appears.
-
In the Match Criteria panel, configure the Source IP and Destination IP parameters.
-
Configure additional parameters as required.
-
Save your changes and close the form.
You can configure up to 256 filter entries.
|
5 |
To delete an entry, choose the entry from the list in the Filter Entries tab and click Delete.
|
6 |
To define the order in which the policy tries to match filter entries with packets, perform the following steps for each filter entry.
-
Click Search to find an existing filter entry. The list of filter entries is displayed.
-
Select a filter entry and click Renumber ID. The Renumber Entry ID form opens.
-
Configure the New Entry ID parameter.
-
Save your changes. The Entry ID column displays the new identifier assigned to the entry.
|
7 |
Save your changes. The ACL IP Exception Filter Policies form reappears.
|
8 |
Close all open forms.
End of steps |