To modify a global entry
Before you begin
Global entries are user-created entries in the Local Host Entity Manager. These entries (IP Address and Port Number) are generally those of either third party servers, or NEs that are un-managed in the NFM-P. The NFM-P allows modification of global entries. When the IP Address and Port Number parameters of a global entry are modified, these parameters are modified correspondingly across all matching remote-hosts in the network. This would allow seamless migration among third part servers.
Consider the following:
-
This procedure is applicable only to global entries. The IP Address and Port Number parameters of discovered entries cannot be modified.
-
Modification of the IP Address and Port Number parameters of a global entry is propagated to all matching remote-hosts in the network. These “matching” remote-hosts can be viewed on the IP Transports tab of the Global Entry properties form.
-
Modification of the Name and Description parameters remains a local change in the global/discovered entry and they are not propagated across matching remote-hosts in the network.
-
Deletion of a global entry will only delete the entry from the NFM-P. It will not delete matching remote-hosts in the network.
Steps
1 |
Choose Tools→Local Host Entity Manager from the NFM-P main menu. The Local Host Entity Manager form opens. |
2 |
Select a global entry in the list and click Properties. The Network Wide Local Host (Edit) form opens. |
3 |
On the General tab, configure the IP Address and Port Number parameters. |
4 |
Click OK to confirm your actions. |
5 |
Close the form. End of steps |