To configure the AIM mediation and discovery for management of the VSR-I
General information
The NFM-P uses SNMPv2 or SNMPv3 to manage the AIM for VSR-I. After the AIM is discovered, the VSR-I IP is automatically added to the AIM discovery rule, so that it is automatically discovered.
Note: AIM does not support auto-registration of the NFM-P IP address for trap forwarding during discovery. You must manually enter the NFM-P IP address during AIM agent configuration at start-up so that traps from the AIM agent are sent to the NFM-P.
Note: You must configure the SNMPv2 or SNMPv3 parameters the same way for AIM and the VSR-I.
Steps
1 |
Configure an SNMPv2c or SNMPv3 mediation security policy on the NFM-P.
|
2 |
Create a discovery rule for the VSR-I on the NFM-P:
|
3 |
Use the NFM-P client to discover the VSR-I. The NFM-P discovers both AIM and VSR-I in a new topology group under the equipment tree named VSR-a.. End of steps |