To configure an NE as a BMP client
Steps
1 |
In the navigation tree Equipment or Routing view, right-click on an NE and choose Properties. The Network Element (Edit) form opens. |
2 |
Click on the Globals tab, then the BMP sub-tab. |
3 |
Configure the Administrative State parameter. |
4 |
Click on the Stations sub-tab. |
5 |
From the Stations sub-tab, click Create. The Monitoring Station (Create) form opens. |
6 |
Configure the parameters to create a monitoring station. |
7 |
Repeat Step 5 to create additional monitoring stations as needed. Up to eight monitoring stations can be created. |
8 |
Save your changes and close the forms. End of steps |