To enable BMP

Steps
 

Perform one of the following:

  1. Navigate to a BGP site, peer group, or peer on an NE.

    In the navigation tree Routing view, expand to one of the following:

    • Network→NE→Routing Instance→BGP

    • Network→NE→Routing Instance→BGP→Peer Group.

    • Network→NE→Routing Instance→BGP→Peer Group→Peer.

  2. Navigate to a BGP site, peer group, or peer on a VPRN routing instance.

    1. Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

    2. Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

    3. On the service navigation tree, expand to one of the following:

      • Sites→Routing Instance→Protocols→BGP

      • Sites→Routing Instance→Protocols→BGP→Peer Group.

      • Sites→Routing Instance→Protocols→BGP→Peer Group→Peer.

Right-click on the BGP entity and choose Properties. The BGP entity (Edit) form opens.


Click on the BMP tab.


Configure the Enable Monitoring parameter and click Apply. The Monitor and Stations panels appear.


Configure the All Stations parameter to enable all stations to monitor BGP, or select individual stations in the Stations panel.


Configure the parameters.


Save your changes and close the forms.

End of steps