To modify MAC address range entries in an OmniSwitch LPS port

Steps
 

In the navigation tree Routing view, expand Network→OmniSwitch NE→Bridge Instance.


Right-click on the Bridge Instance Object icon and choose Properties. The Bridge Instance (Edit) form opens.


Choose a port and click Properties. The Learned Port Security (Edit) form opens.


Click on the LPS Learned MAC Ranges tab. A list of Low and High MAC address ranges added on the LPS port is displayed.


Select the MAC address range entry to modify. You may either click Properties button or double-click the MAC range entry.


You can edit the MAC address range entries to meet the following conditions:

  • Overlapping Low or High MAC Ranges are not allowed.

  • When the MAC address range entry must contain the Low MAC Range starting from 00-00-00-00-00-00, click on the default entry 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF to modify the High MAC Range

  • To expand the LPS MAC range, keep the Low MAC Range the same and modify the High MAC Range to a higher value than the current High MAC Range value

  • To shrink the LPS MAC range, keep the Low MAC Range the same and modify the High MAC Range to a lower value than the current High MAC Range value

  • Overlapping low or high MAC range is not allowed.


Click OK to save your changes.


If required, repeat steps Step 5 to Step 7 to modify the MAC range entries.


If required, repeat steps Step 3 to Step 7 to modify the MAC range entries for other LPS ports.


10 

Click Apply to save the changes and close the form.

End of steps