To generate a network-wide inventory of managed objects

Purpose

Perform this procedure to inventory all equipment of one object type, for example, all cards. The table below describes the columns to include in the inventory list for each equipment type.

Table 17-1: Inventory columns for managed objects

Equipment

Columns to include in inventory list

Cards

  • Manufacture Date

  • Part Number

  • Serial Number

  • CLEI Code

CCMs

  • Manufacture Date

  • Part Number

  • Serial Number

  • CLEI Code

  • CCM Index

  • CCM Equipped Type

Fan trays

  • Operational State

  • Administrative State

  • Device State

Flash memory units

  • Serial Number

  • Firmware Revision

  • Model Number

  • Capacity (sectors)

  • Amount Used (sectors)

Physical links

  • Endpoint A Type

  • Endpoint A — Port

  • Endpoint B Type

  • Endpoint B — Port

Ports

  • Name

  • CLI Name

  • MTU (bytes)

  • State

Power supply trays

  • Administrative State

  • Operational State

  • AC Voltage Status

  • DC Voltage Status

  • Assigned Type

Processors

  • Operational State

  • Administrative State

  • CLEI Code

  • Manufacturer

  • Manufacture Date

  • Part Number

  • Serial Number

Shelves

  • Operational State

  • Administrative State

  • CLEI Code

  • Manufacturer

  • Manufacture Date

  • CLLI Code

  • Part Number

  • Serial Number (Manufacturer Details)

Management ports

  • System ID

  • Management IP Address

  • Location

  • Chassis Type

  • Sys Object ID

  • Software Version

  • Descriptor Version (software release)

  • Resource Group ID

Steps
 

Choose Manage→Equipment→Equipment from the NFM-P main menu. The Manage Equipment form opens.


Choose Card (Physical Equipment) from the object drop-down menu.


Remove all columns from the list except the required columns shown in the table above. See To list and sort equipment information for information.


Save the inventory output. See To save an inventory list .


Close the form.

End of steps