Configure TCP optimization policy
|
|
|
1 |
Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.
|
2 |
Click Create→AA TCP Optimization, or select an AA TCP optimization policy and click Properties. The AA TCP Optimization (Create | Edit) form opens.
|
3 |
Configure the parameters.
Note: To configure a dynamic initial slow start threshold, enter 1000001 for the initial slow start threshold parameter. This will set the initial slow start threshold to Auto on the NE.
|
4 |
Click Apply.
|
5 |
Distribute the policy to NEs, as required.
|
6 |
Click OK. The AA TCP Optimization (Create | Edit) form closes.
|
Bind policy to AA session filter
|
|
|
7 |
Click Create→AA Session Filter, or select an AA session filter and click Properties. The AA Session Filter (Create | Edit) form opens.
|
8 |
If you are creating an AA session filter, configure the parameters and click Apply.
|
9 |
Click on the Entries tab.
|
10 |
Click Create, or select a session filter and click Properties. The AA Session Filter Params (Create | Edit) form opens.
|
11 |
Set the Action parameter to TCP Optimizer.
|
12 |
Use the Select button in the TCP Optimization panel to specify the new TCP optimization policy.
|
13 |
Click OK. The AA Session Filter Params (Edit) form closes, and the AA Session Filter (Create | Edit) form is again displayed.
|
14 |
Click on the General tab.
|
15 |
Click Apply.
|
16 |
Distribute the policy to NEs, as required.
|
17 |
Close the AA Session Filter (Create | Edit) form.
|
18 |
Close the Application Assurance Policies form.
End of steps |