View installed drivers on the NFM-P

Steps

Perform this procedure to determine which drivers are installed on the NFM-P.

 

Choose Administration→Generic NE Manager from the NFM-P main menu. The Generic NE Manager form opens.


Choose Generic NE Driver (Generic NE) from the drop-down menu and click Search. A list of installed drivers appears.


To view the properties of a driver, select a driver and click Properties. The Properties form opens. You can view the driver and driver version.

The Maximum NFM-P Version parameter shows the highest NFM-P release that the driver supports.

The Operational State parameter shows the current operational status of the GNE driver. The operational state can be Operational, Unsupported, or File Missing.

Note: GNEs cannot be managed using a driver which is not Operational. If a driver is in a File Missing state, the driver must be re-installed. The driver cannot be replaced until the original driver is re-installed. If a driver is in an Unsupported state, a supported driver is required to replace the unsupported driver.

End of steps