Workflow to configure a virtual router

Overview

The following workflow lists the high-level steps required to configure a virtual router on a core network LAN or an IES. Each step represents an XML configuration request. See the XML API SDK Sample Code Navigator for sample XML scripts.

This workflow assumes the following:

an L3 interface primary IP address is available for the network or IES service.
each IP interface must have a primary IP address.

Stages


1	Create a global VRRP priority-control policy for non-owner VRRP instances.
2	Distribute the global VRRP priority-control policy to a non-owner VRRP router.
3	Create a virtual router for a core network LAN, or an IES service.
4	As required, create an owner VRRP instance in the virtual router.
5	As required, create a non-owner VRRP instance in the virtual router.

Use subject to agreed restrictions on disclosure and use.