Perform the following operations on selected alarm messages in the alarm list:

• Acknowledge or unacknowledge an alarm. Select one or more alarms, then click (Table row actions) , Edit Alarm(s) and configure the Acknowledge parameter.

  If you select multiple NFM-P alarms, you can configure the Assigned Severity, and Acknowledgement Note. If you select multiple WS-NOC alarms, you can configure the Acknowledgement Note. If you select both NFM-P and WS-NOC alarms, you can configure the Acknowledgement Note.

• Delete or clear an alarm. Select one or more alarms and click (Table row actions) , Delete Alarm(s) or Clear Alarm(s).

• Assign alarm severity. Select one or more alarms, then click (Table row actions) , Edit Alarm(s) and configure the Severity parameter.

• Assign alarm admin state. Select one or more alarms, then click (Table row actions) , Edit Alarm(s) and configure the Admin State parameter.

• Edit alarm custom text. Select one or more alarms, then click (Table row actions) , Edit Alarm(s) and configure the Custom Text parameter.