| |
|
1 |
To enable this functionality, modify the arm-system.conf file as follows: nrcp { demand-matrix { enabled = true } }
|
2 |
From the Path Simulation, LSP Demand Matrix view, a list of all demands associated with all existing LSPs is displayed.
To view a list of LSPs affected by a specific demand, click More  , Show in LSP List inline with any demand. A list of the LSPs affected by the selected demand is displayed.
|
3 |
Return to the list of demands, then perform one of the following:
-
To edit the bandwidth of a single demand, click More , Edit Bandwidth inline with any demand. The Edit Demand Bandwidth form opens.
-
To edit the bandwidth of multiple demands, select multiple demands and click Edit Bandwidth  . The Edit Demand Bandwidth form opens.
|
4 |
Enable the radio button next to one of the following parameters to provide a value:
|
Parameter |
Description |
|
Set to (Mbps) |
Specifies a new demand bandwidth value in Megabits per second. |
|
Increase by % |
Specifies an increase in demand bandwidth relative to the existing value. |
|
Decrease by % |
Specifies a decrease in demand bandwidth relative to the existing value. |
|
5 |
Click SAVE. The Edit Demand Bandwidth form closes.
|
6 |
To import LSP bandwidth, click IMPORT LSP BANDWIDTH. The Import LSP bandwidth form opens.
|
7 |
Configure the required parameters:
|
Parameter |
Description |
|
Remote CAS Authentication Server IP Address |
The IP address of the CAS server from which to retrieve LSP bandwidth |
|
Username |
The username with which to log in to the CAS server |
|
Password |
The password to be used with the specified username |
|
LSP AGGREGATION PERIOD |
The interval at which all LSP bandwidths will be updated with the most recently-available aggregations |
|
8 |
Click IMPORT. The Import LSP bandwidth form closes.
|
9 |
Click SIMULATE. The Simulation Results form opens.
|
10 |
A dialog box appears, displaying the simulation's progress. When complete, click VIEW SIMULATIONS RESULTS. A list of rerouted LSPs is displayed.
End of steps |