Unmanaging a device results in the loss of all historical AA statistics for the device.
When you suspend the management of a device, the NFM-P raises a critical alarm against the device.
Perform this procedure to change the management state of a device.
Note: Managing and unmanaging a HIP device is not supported. To unmanage or delete a HIP device, you must set the EM system administrative state to Down, and then delete the EM system.
Steps
1
Choose Administration→Discovery Manager from the NFM-P main menu. The Discovery Manager (Edit) form opens.
2
Click on the Managed State tab.
3
Select a device in the list.
4
Perform one of the following:
Click Manage to return an unmanaged or suspended device to the managed state.
Click Suspend to suspend the management of the device.
Click Unmanage to stop the management of the device.
5
Save your changes. The Managed State of the device changes to one of the following:
managed, if you are remanaging the device
suspended, if you are suspending management of the device
not managed, if you are unmanaging the device
6
If Service Bandwidth Management is enabled, perform a system-wide CAC audit to ensure that the bandwidth is properly calculated:
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
