Procedure 3-54: Configure EVC loopback

Create EVC instance management
 
1

Select Data -> EVC Loopback Management -> EVC Instance Management. The following screen is displayed:

Figure 3-115: Management EVC loopback instance
Management EVC loopback instance+
2

Click Create. The following screen is displayed.

Figure 3-116: Create EVC loopback instance
Create EVC loopback instance+
3

Enter user label (Loopback Name) for the loopback in the User Label text entry box.

4

Select Interface port number from the Port drop-down for which the loopback is to be created.

5

Select Filter ID.

6

Select address swap parameter, Row Status, Name, Timeout (min), Drop Opposite values for the loopback instance.

7

Click Save to save the changes.

End of steps

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements