How do I configure historical alarm list settings?

Purpose

Configure logging and overflow settings for the historical alarm list. These settings apply to NSP, WS-NOC and MDM alarms. NFM-P alarm settings are configured in NFM-P; see the NFM-P Administrator Guide.

You must have administrator privileges to configure alarm settings.

Steps
 
1 

In the Network Map And Health, Historical Alarms view, click the More button png5.png and select Settings. The Alarm Settings form opens, with the Historical Alarms panel displayed.

2 

Enable the Archive Settings option and enable either or both of the Log on Change and Log on Deletion options.

3 

Under Overflow Settings, specify the maximum alarm count at which an alarm overflow warning is issued.

4 

Specify a warning threshold as a percentage of the maximum alarm count, and specify the percentage of the alarm count to be purged at the time of the warning message.

5 

Specify a critical threshold as a percentage of the maximum alarm count, and specify the percentage of the alarm count to be purged at the time of the critical message.

6 

Save your changes.

End of steps