How do I modify the system IP MPLS configuration policy?
Purpose
Use this procedure to modify the IP MPLS Configuration policy. The IP MPLS Configuration policy allows you to configure the maintenance mode of an IP link. You can choose one of the following maintenance modes:
-
Manual
You must manually resignal LSPs, trigger GCO, or wait for network changes to move resources from the affected link and back onto the best path.
-
Automatic
NSP automatically moves LSPs from the affected resources, usually using re-signalling.
Steps
|
|
1 |
Perform one of the following:
-
From the Path Control, Policies view, choose System IP MPLS Configuration from the drop-down menu and click Create Policy . The Edit System IP MPLS Configuration form opens.
-
From the Path Control, Policies view, click Edit in-line with the System IP MPLS Configuration policy. The Edit System IP MPLS Configuration form opens.
|
2 |
Configure the required parameters:
Parameter |
Description |
Description |
Describes the System IP MPLS Configuration policy |
Maintenance Mode |
Specifies whether the LSPs riding a link set that is placed into maintenance mode must be manually rerouted, or if this will occur automatically |
|
3 |
Click SAVE. The System IP MPLS Configuration policy is modified.
End of steps |
© 2025 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.