How do I change the samauxdb RHEL user password?
Purpose
Perform this procedure to change the password of the samauxdb RHEL user on an auxiliary database station.
Note: You must set the password to the same value on each auxiliary database station.
Steps
1 |
Log in to the auxiliary database station as the samauxdb user. |
2 |
Open a console window. |
3 |
Enter the following: # passwd ↵ The following prompt is displayed: New Password: |
4 |
Enter the new password and press ↵. The following prompt is displayed: Confirm New Password: |
5 |
Enter the new password again and press ↵. The password is changed. |
6 |
Record the new password and store it in a secure location. End of steps |