To configure an APN policy

Steps
 
1 

Choose Policies→Residential Subscriber from the NFM-P main menu. The Residential Subscriber Policies form opens.

2 

Click Create→APN Policy or select an existing APN policy and click Properties. The APN Policy (Create|Edit) form opens.

Modifying an active APN policy is potentially service-affecting. Ensure that you consider the implications of reconfiguring the policy before you proceed.

3 

On the General tab, configure the Displayed Name parameter.

4 

Click on the APN tab to configure APN entries for the APN policy.

  1. Click Create or select an existing APN entry and click Properties. The APN (Create|Edit) form opens.

  2. Configure the Displayed Name parameter.

  3. Configure the APN entry in ONE of the following ways:

    • For RADIUS authentication; select a RADIUS authentication policy

    • For Diameter authentication; select a Diameter authentication policy

    • For LUDB authentication; select a Local user database

    • For default service; select a service ID and interface ID

      Configure AMBR QoS mapping downlink and uplink information, if required.

  4. Save your changes and close the form.

5 

Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs.

End of steps