To configure an AA Tether Detection policy

Purpose

An AA Tether Detection policy is created automatically when an ISA-AA group and its associated AA Group policy is created on a 7450 ESS NE. The Subcriber Scale parameter of the ISA-AA group must be configured to Mobile Gateway or another Gateway setting, depending on the NE release.

See To configure an ISA-AA group and ISA-AA partitions to create an ISA-AA group. Use this procedure to complete the configuration.

Steps
 
1 

Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.

2 

Select an AA Tether Detection policy and click Properties.

3 

Configure the required parameters on the General tab.

4 

Click on the TTL Monitoring tab.

5 

Configure the required parameters.

6 

Click on the Single Device Expected TTLs tab.

7 

Click Create. The Expected TTL, Global Policy (Create) form opens.

8 

Configure up to 16 TTLs.

9 

Click Apply.

10 

Distribute the policy to NEs, as required.

11 

Close the forms.

End of steps