In the navigation tree routing view, expand Network→NE→Routing Instance.

Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.

Click on the Static Routes tab and click Create or select an existing static route and click Properties. The Static Route (Create|Edit) form opens.

Note: You can alternatively create a static route by right-clicking on a static route icon in the navigation tree routing view, and choose Create Static Route from the menu.

Configure the required general parameters.

Configure the required parameters in the Destination panel.

To create an indirect static route, see To configure LSP entries with indirect static routes .

To assign a network interface for the static route if IPv6 is enabled on the routing instance, select an interface in the Destination panel. See To create an L3 network interface on a routing instance for information about how to configure a network Interface.

Configure the required parameters in the Other panel.

Configure the required parameters in the CPE Check panel.

To assign a prefix list policy to the static route, select a prefix list policy in the Prefix panel. See To configure a prefix list policy for information about how to configure a Prefix List policy.

You cannot specify a Prefix List policy if the BFD Enabled or Enable CPE Check parameters are enabled for the static route.

Configure the parameters in the Source/Destination Class Index panel.

Save your changes and close the form.

End of steps